Fortus 900mc. The Production System - Manufacturing center for production outputs.
Designed and manufactured for accuracy and repeatability, this production machine is based on the mc (manufacturing center) platform, distinct from other FDM additive fabrication systems. It provides part tolerances that are substantially improved over previous systems.
System Features:
Highest accuracy: ± 0.003 inch or ± 0.0015 inch whichever is greater*
Largest build envelope and the most material bays for extended unattended builds
36 x 24 x 36 (2 build material / 2 support material bays)
Large parts - high volume of parts
Precision ball screw technology for Increased accuracy, repeatability, and reliability
Multiple throughput (build speed) options
Largest build envelope and the most material bays for extended unattended builds
36 x 24 x 36 (2 build material / 2 support material bays)
Large parts - high volume of parts
Precision ball screw technology for Increased accuracy, repeatability, and reliability
Multiple throughput (build speed) options
- 0.013 and 0.010 inch for faster throughput
- 0.007 inch for fine feature detail and surface finish
Fortus 900mc Specifications
220% greater throughput over the Dimension Elite, 25% Greater than FDM 360mc
Enhanced manufacturing process provides high-accuracy and repeatability
High resolution and feature detail
High Capacity 92 cubic inch material canisters, 2 material, 2 support
Can build in multiple colors (material dependent)
Achievable Accuracy: Model accuracy is +/- .003 inch or +/-.0015 inch per inch, whichever is greater. *Note: accuracy is geometry dependent.
Layer Thickness (material dependent): .007, .010, .013
System Size: 109.1 x 66.3 x 79.8 inches
System Size with Manufacturing Tower: 109.1 x 66. x 89.8 inches
Network Communication: 10/100 base T connection. Ethernet protocol
Operating Environment: Maximum room temperature of 85°F (29.4°C). Maximum room dew point of 78°F (25.6°C).
Power Requirements: 230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)
Enhanced manufacturing process provides high-accuracy and repeatability
High resolution and feature detail
High Capacity 92 cubic inch material canisters, 2 material, 2 support
Can build in multiple colors (material dependent)
Achievable Accuracy: Model accuracy is +/- .003 inch or +/-.0015 inch per inch, whichever is greater. *Note: accuracy is geometry dependent.
Layer Thickness (material dependent): .007, .010, .013
System Size: 109.1 x 66.3 x 79.8 inches
System Size with Manufacturing Tower: 109.1 x 66. x 89.8 inches
Network Communication: 10/100 base T connection. Ethernet protocol
Operating Environment: Maximum room temperature of 85°F (29.4°C). Maximum room dew point of 78°F (25.6°C).
Power Requirements: 230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)
Functional Prototyping
Jigs/Fixtures
Patterns
Sand Casting
Investment Casting
Tooling
Bridge Tooling
HydroForming
ThermoForming
Trim Tools
Layup Tools
End Use Parts
Short Run Production
Just-In-Time Mfg.
Large Parts - 36x24x36
Jigs/Fixtures
Patterns
Sand Casting
Investment Casting
Tooling
Bridge Tooling
HydroForming
ThermoForming
Trim Tools
Layup Tools
End Use Parts
Short Run Production
Just-In-Time Mfg.
Large Parts - 36x24x36
Fortus 900mc Video
Fortus 900mc
Tekpro Provide Solutions That:
REDUCE
Time to Market
LOWER
Product Development Costs
Manufacturing Costs
LOWER
Build Material Options:
RP & Mfg. Equipment
RP & Mfg. Equipment
More than just
a Prototype
a Prototype
With Fortus 3D Production Systems you produce much more than just a prototype. You get Real thermoplastics, allowing you to make Real Parts.
Lowest Total Cost of Ownership
Fortus 3D Production Systems produce real thermoplastic parts for a fraction of the cost of resin based systems.
