Fortus 400mc. The Flexible System - Handles a wide variety of materials for various applications.
Engineered to provide accurate, repeatable, and configurable high-performance parts in-house, this workhorse uses a variety of production-grade thermoplastics. Customization allows you to select material packages and build-envelope sizes so you only pay for the capabilities you need.
System Features:
Better accuracy: ± 0.005 inch or ± 0.0015 inch whichever is greater
Additional capacity for longer unattended builds
Multiple throughput (build speed) options
Additional capacity for longer unattended builds
- Standard capacity
- 14 x 10 x 10 inch (355 x 254 x 254 mm)
- 1 build and 1 support bay
- Large capacity
- 16 x 14 x 16 inch (406 x 356 x 406 mm)
- 2 build and 2 support material bays
Multiple throughput (build speed) options
- 0.013 and 0.010 inch for faster throughput
- 0.007 and 0.005 inch for fine feature detail and surface finish
Build Material Options:
Fortus 400mc Specifications
200% greater throughput over the Dimension Elite, 15% Greater than FDM 360mc
Enhanced manufacturing process provides high-accuracy and repeatability
Highest resolution and feature detail
High Capacity 92 cubic inch material canisters
Two build envelope options
Can build in multiple colors (material dependent)
Achievable Accuracy: Model accuracy is +/- .005 inch or +/-.0015 inch per inch, whichever is greater (+/- .127 mm or +/- .0015 mm per mm, whichever is greater). Note: accuracy is geometry dependent.
Layer Thickness (material dependent): .005, .007, .010, .013
System Size: 50 x 35 x 77 inches
Network Communication: 10/100 base T connection. Ethernet protocol
Operating Environment: Maximum room temperature of 85°F (29.4°C). Maximum room dew point of 78°F (25.6°C).
Power Requirements: 230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)
Enhanced manufacturing process provides high-accuracy and repeatability
Highest resolution and feature detail
High Capacity 92 cubic inch material canisters
Two build envelope options
Can build in multiple colors (material dependent)
Achievable Accuracy: Model accuracy is +/- .005 inch or +/-.0015 inch per inch, whichever is greater (+/- .127 mm or +/- .0015 mm per mm, whichever is greater). Note: accuracy is geometry dependent.
Layer Thickness (material dependent): .005, .007, .010, .013
System Size: 50 x 35 x 77 inches
Network Communication: 10/100 base T connection. Ethernet protocol
Operating Environment: Maximum room temperature of 85°F (29.4°C). Maximum room dew point of 78°F (25.6°C).
Power Requirements: 230 VAC, 50/60 Hz, 3 phase, 16A/phase (20 amp dedicated circuit required)
Functional Prototyping
Jigs/Fixtures
Patterns
Sand Casting
Investment Casting
Tooling
Bridge Tooling
HydroForming
ThermoForming
Trim Tools
Layup Tools
End Use Parts
Short Run Production
Just-In-Time Mfg.
Jigs/Fixtures
Patterns
Sand Casting
Investment Casting
Tooling
Bridge Tooling
HydroForming
ThermoForming
Trim Tools
Layup Tools
End Use Parts
Short Run Production
Just-In-Time Mfg.
Fortus 400mc Video
Fortus 400mc
Tekpro Provide Solutions That:
REDUCE
Time to Market
LOWER
Product Development Costs
Manufacturing Costs
LOWER
RP & Mfg. Equipment
RP & Mfg. Equipment
More than just
a Prototype
a Prototype
With Fortus 3D Production Systems you produce much more than just a prototype. You get Real thermoplastics, allowing you to make Real Parts.
Lowest Total Cost of Ownership
Fortus 3D Production Systems produce real thermoplastic parts for a fraction of the cost of resin based systems.
