7940 Cherry Ave., Suite 202, Fontana, CA 92336
Tel: (909) 829.4950
Fax: (909) 829.4969
Direct Digital Manufacturing
Direct Digital Manufacturing with Tekpro Rapid Prototyping Equipment allows you to go from concept to finished part in a matter of hours using real world thermoplastic materials.
These materials allow you to manufacture real parts that are tough enough for functional testing, installation, and most importantly end use. Real production thermoplastics are stable and have no appreciable warpage, shrinkage, or moisture absorption.
Because thermoplastics are environmentally stable, part accuracy (or tolerance) doesnt change with ambient conditions or time.
Use parts created on Tekpro Rapid Prototype Equipment for:
These materials allow you to manufacture real parts that are tough enough for functional testing, installation, and most importantly end use. Real production thermoplastics are stable and have no appreciable warpage, shrinkage, or moisture absorption.
Because thermoplastics are environmentally stable, part accuracy (or tolerance) doesnt change with ambient conditions or time.
Use parts created on Tekpro Rapid Prototype Equipment for:
Real World Case Studies:
Using Tekpro Direct Digital Manufacturing, customer designed, manufactured, assembled, dyno tested and installed a custom air filter enclosure for a high performance vehicle in less than a week.
Because of modifications to the engine and limitations of space, the air filter enclosure and ducting needed to be custom built to fit. Traditional manufacturing would have been too costly, and deadlines would not have been met. By manufacturing using Tekpro Rapid Prototype Equipment, the enclosure and ducting was able to be produced and installed in the vehicle within budget and within the timeline specified by the customer. Real world thermoplastics withstand the heat and vibrations needed in this harsh environment.
At date of this publication, customer has driven the vehicle for over 40,000 miles using the custom air filter enclosure and ducting.
Using Tekpro Direct Digital Manufacturing the Fire Department created thermoplastic case for custom manufactured communications device.
Firefighters battling blazes in remote mountain areas needed a reliable method of communicating. No commercial solution existed, so the fire department developed a device capable of reliably communicating regardless of the area topology.
Producing only 100 devices, traditional injection molding of the case proved to be too costly and time consuming. By manufacturing the handheld cases using Tekpro Direct Digital Manufacturing, the Fire Department was able to deliver the devices within days of the design being completed - instead of weeks or months, and at a fraction of the cost of traditional manufacturing.
Because of modifications to the engine and limitations of space, the air filter enclosure and ducting needed to be custom built to fit. Traditional manufacturing would have been too costly, and deadlines would not have been met. By manufacturing using Tekpro Rapid Prototype Equipment, the enclosure and ducting was able to be produced and installed in the vehicle within budget and within the timeline specified by the customer. Real world thermoplastics withstand the heat and vibrations needed in this harsh environment.
At date of this publication, customer has driven the vehicle for over 40,000 miles using the custom air filter enclosure and ducting.
Using Tekpro Direct Digital Manufacturing the Fire Department created thermoplastic case for custom manufactured communications device.
Firefighters battling blazes in remote mountain areas needed a reliable method of communicating. No commercial solution existed, so the fire department developed a device capable of reliably communicating regardless of the area topology.
Producing only 100 devices, traditional injection molding of the case proved to be too costly and time consuming. By manufacturing the handheld cases using Tekpro Direct Digital Manufacturing, the Fire Department was able to deliver the devices within days of the design being completed - instead of weeks or months, and at a fraction of the cost of traditional manufacturing.
Create single parts for less cost than overseas manufacturing
Small production runs
Direct manufacturing of Jigs and Fixtures
Manufacture retired / obsolete parts
Organic shapes too costly to manufacture traditionally
Manufacturing customized products
Manufacturing personalized products
Small production runs
Direct manufacturing of Jigs and Fixtures
Manufacture retired / obsolete parts
Organic shapes too costly to manufacture traditionally
Manufacturing customized products
Manufacturing personalized products
Custom Air Filter Enclosure and Ducting
Handheld Communications Device for Fire Department
